1-Tonne Mini Excavators for Sale

What we sell

Two diggers, both 1-tonne class

Both are 1-tonne (1t) class mini excavators: a small excavator that gets into many backyards, tows behind a ute and handles most jobs around a house, a block or a small farm. Same size, same swing boom, expandable tracks and hydraulic thumb. The difference is the engine, and the price. Both are built in Jining, China, checked and filmed by us before they ship, and delivered to your door, usually 8 to 10 weeks after your deposit.

Prices below include GST and delivery within 150 km of the port in Brisbane, Sydney or Melbourne. Beyond that we add A$250 (incl GST) for each extra 100 km or part of it. Adelaide, Perth, Hobart, Darwin and remote places are priced separately on your quote.

PD12 1-tonne mini excavator with canopy, swing boom and dozer blade
Our pick for regular use

PD12 Kubota

Kubota D722 3-cylinder diesel

Hydraulic pilot joysticks and a manual quick hitch included

Regular use, longer days, and work in the heat.

From A$16,490 incl GST

See the PD12
PD10 1-tonne mini excavator with canopy, swing boom and dozer blade

PD10 Koop

Koop single-cylinder diesel

Side joysticks; quick hitch on request

Weekend and occasional jobs: a few trenches, post holes, garden beds, tidying up the yard.

From A$11,990 incl GST

See the PD10

What a 1-tonne mini excavator can do

A 1t excavator is small enough to get into backyards and along fence lines, and strong enough for most of the digging on a property:

  • Trenches for irrigation, power, ag pipe and stormwater, down to about 1.5 to 1.8 metres
  • Post holes and fence lines with an auger
  • Garden beds, levelling, retaining wall footings and backfilling with the blade
  • Small stumps, rocks and logs with the hydraulic thumb
  • Cleaning out drains and the edges of small dams

Where it isn't the right tool: big volumes of soil, deep septic trenches, hard rock, and work all day, every day. For those a 1.7-tonne or larger machine is quicker. Our size guide compares the classes.

Will it fit, and can you tow it?

The PD12 is 903 mm wide with its tracks pulled in, and the tracks push out to 1,200 mm for stability once you're through, so it needs a gap of a little over 900 mm and won't fit a narrow 820 mm side gate. For transport it measures 2,427 × 903 × 2,217 mm. Measure the narrowest point on the way in, including gate posts, downpipes and meter boxes, and send it to us: we'll confirm whether it fits before you order, and give you the PD10's measurements.

A 1-tonne class machine on a light plant trailer usually stays under 2,000 kg loaded, the point above which trailers need brakes on every wheel and a breakaway system. We confirm your machine's operating weight on the quote. The towing section of our size guide has the trailer rules.

PD12 and PD10 side by side

PD12 KubotaPD10 Koop
Price, incl GST, deliveredFrom A$16,490 incl GSTFrom A$11,990 incl GST
EngineKubota D722 3-cylinder dieselKoop single-cylinder diesel
CoolingWater-cooledAir-cooled
ControlsHydraulic pilot joysticksSide joysticks
Swing boom, expandable tracks, hydraulic thumbYesYes
Buckets includedThreeThree
Quick hitchManual, includedOn request
Best forRegular use, long or hot daysOccasional jobs around your own place

Warranty on both: 12 months or 2,000 hours, whichever comes first. Built to order, usually 8 to 10 weeks to your door.

Can't decide on the engine?

We've written up the differences between a Koop single and a Kubota three-cylinder, and who each one suits.

Koop or Kubota: which engine? →

Attachments and parts

Augers, extra buckets and other attachments can ship with your digger. Ask and we'll put the price on your quote.

Ask about attachments →

How buying one works

  1. 1Written quoteSend your postcode and we reply with a price delivered to your place, GST shown on its own line.
  2. 230% depositBy bank transfer. Refunded in full until the factory starts building your machine.
  3. 3Your inspection videoWe film your machine running at the factory, with the engine plate, serial number and asbestos test report.
  4. 4Balance, then deliveryPay the other 70% once you're happy. It ships and arrives at your door, usually 8 to 10 weeks from the deposit.

Before delivery we tell you what truck is coming and how the machine gets off it, so tell us about narrow driveways, soft ground or side-gate-only access when you ask for a quote; if a truck can't get close, we work out another way and put any extra cost on the quote. The canopy and seatbelt details are also on the quote, in writing, before you pay a deposit. Delivery is included within 150 km of the port in Brisbane, Sydney or Melbourne; a place 280 km from the port by road pays two lots of the extra, A$500. Warranty: 12 months or 2,000 hours, whichever comes first, handled by us by email and video call, with parts sent by courier. Details on delivery and payment and warranty.

Want a delivered price for your postcode?

Tell us where it's going and what you'll use it for.

Ask for a price

Before you buy: our guides

How Much Does a Mini Excavator Cost in Australia? (2026)What 1-tonne mini excavators really sell for in Australia in 2026: Chinese, Kubota-engined and Japanese brands, used prices, extras and the delivered total.Mini Excavator Sizes: 1 vs 1.5 vs 1.7 Tonne ComparedWeights, widths and digging depths of 1 to 1.8-tonne mini excavators from Kubota, Yanmar, Cat and Takeuchi, plus gate access and Australian towing rules.Hire or Buy a Mini Excavator? The Break-Even Maths2026 dry hire rates for 1 to 1.8-tonne diggers around Australia, the costs on top, what owning costs, and how many days a year before buying pays off.Koop vs Kubota: Are Koop Diesel Engines Any Good?Who makes Koop engines, how the Koop 192F single compares with a Kubota D722, the problems owners report, servicing, and parts prices in Australia.Excavator Licence or Ticket: Do You Need One in Australia?No state issues an excavator licence. What the RIIMPO320F ticket is and costs, when a White Card or training applies, and the rules that matter on your land.Instant Asset Write-Off 2026-27: Buying a Mini ExcavatorHow the permanent A$20,000 instant asset write-off applies to a mini excavator in 2026-27: who qualifies, the 30 June rule, GST, imports and worked examples.Buying a Mini Digger: Local Dealer or Imported to Order?Buying a 1-tonne digger from a local dealer or importing one to order: what you pay, how long you wait and what you give up, with prices from October 2026.Importing a Mini Digger into Australia: The Asbestos RulesWhy Australia tests imported machinery for asbestos, what a valid test report looks like, and what to ask any seller before you buy a mini digger.

Common questions

How much is a 1-tonne mini excavator?

Ours are listed above, delivered and incl GST. For the rest of the market, see our mini excavator price guide.

Do I need a licence to use one?

No state issues a licence to operate an excavator. Work sites and employers have their own training rules; our licence guide explains them.

How long does delivery take?

Usually 8 to 10 weeks from your deposit. Before you pay the balance you get a video of your own machine being checked at the factory.

Should I hire instead?

If you'd only use it a few days a year, hiring can be cheaper. Our hire or buy guide works out the break-even with current hire rates.