How much does a mini excavator cost in Australia?

The short answer

  • A new Chinese-built 1-tonne digger with a single-cylinder diesel, swing boom, expandable tracks, hydraulic thumb and quick hitch: about A$11,000 to A$13,000 incl GST. The middle of ten like-for-like listings was A$11,990.
  • The same size with a Kubota engine: A$12,600 to A$22,000, most often A$15,990 to A$17,999.
  • Chinese brands with their own Australian dealer networks (SANY, Yuchai, Eurotrac): A$24,000 to A$30,000.
  • Japanese brands: new 1-tonne machines are "price on application". Used 1.7-tonne Kubota U17-3s were listed at A$18,000 to A$38,000 plus GST.
  • Need a trailer as well? Add roughly A$4,000 to A$9,000.

New-machine prices were checked on 7 November 2026 and used prices on 13 November 2026. All prices are in Australian dollars and include GST unless marked.

Yellow 1-tonne mini excavator parked on a freshly ploughed paddock

We sell 1-tonne diggers, so we keep a close eye on what everyone else charges. On 7 November 2026 we went through every new 1 to 1.3-tonne machine listed on Machines4u, 141 ads from 25 sellers, then checked the websites of eight more sellers. This guide is what we found, with dealer price lists and used listings filling the gaps. Our own prices are near the end, so you can see where they sit against everyone else.

A note on the word "mini": mini excavators, or mini diggers, range from under a tonne to about six tonnes, and a 5-tonne machine costs several times a 1-tonne one. An average across the whole class tells you very little, so this guide sticks to the 1-tonne class that most people buying for a block, a farm or a backyard are looking at.

1-tonne excavator prices at a glance

New and used 1-tonne class prices in Australia, November 2026

Range of listed pricesOur delivered priceA$0A$5kA$10kA$15kA$20kA$25kA$30kA$35kA$40kSingle-cylinder, basicoften no thumb or wide tracksSingle-cylinder, basic: A$8,745 to A$10,490A$9kA$10kSingle-cylinder, full kitswing boom, expandable tracks, thumbSingle-cylinder, full kit: A$10,989 to A$12,990, middle A$11,990Middle listing: A$11,990A$11kA$13kPD10: A$11,990PD10Kubota engine, 1–1.3 tChinese-builtKubota engine, 1–1.3 t: A$12,599 to A$21,989A$13kA$22kPD12: A$16,490PD12Chinese brands, dealer networkYuchai, Eurotrac, SANYChinese brands, dealer network: A$24,189 to A$29,689A$24kA$30kUsed Kubota U17-3, 1.7 tlisted ex GST, 2018–2026Used Kubota U17-3, 1.7 t: A$18,000 to A$38,000A$18kA$38k
Bars run from the cheapest to the dearest listing we found in each group. The PD10 dot sits on the middle of the like-for-like single-cylinder listings, A$11,990. Japanese brands' new 1-tonne machines are price on application, so they aren't on the chart.
GroupWhat you usually getPrice rangeTypical
Single-cylinder, basicSwing boom; often no hydraulic thumb, expandable tracks or quick hitchA$8,745 – A$10,490–
Single-cylinder, full kitSwing boom, expandable tracks, hydraulic thumb, quick hitchA$10,989 – A$12,990A$11,990
Kubota engine, 1–1.3 tKubota two- or three-cylinder diesel, usually the same kitA$12,599 – A$21,989A$15,990 – A$17,999
Chinese brands with a dealer networkYuchai U10, Eurotrac HE12, SANY SY10UA$24,189 – A$29,689–
Japanese brands, newKubota U10-5, Yanmar SV08, Takeuchi TB210R, Bobcat E10Price on application–
Used Kubota U17-3 (1.7 t)2018 to 2026 machines, 25 to 2,953 hoursA$18,000 – A$38,000 + GST–

New prices: Machines4u listings and sellers' websites, 7 November 2026. Brand-network prices partly from 24 October 2026. Used: Machines4u Kubota U17-3 listings, 13 November 2026.

What counts as a 1-tonne digger

"1 tonne" is a class, not an exact weight. Kubota lists its K008-5 at about 975 kg and its U10-5 at 1,050 kg; Yanmar Australia lists the SV08-1 at 1,035 kg. Chinese-built machines sold as 1 tonne range from about 950 kg to 1.2 tonnes. Most fit through a gap of 700 to 1,000 mm with the tracks pulled in, which is what matters for side gates and backyards.

Prices climb quickly with size. Digger King's own price list goes from A$12,990 for its 1-tonne machine to A$18,990 for 1.3 tonnes and A$26,990 for 1.8 tonnes, all plus GST. If you're unsure which size you need, our guide to choosing a mini excavator size compares widths, weights and digging depths.

Single-cylinder diggers: about A$9,000 to A$13,000

These are the cheapest new diggers you can buy here. Almost all of them use an air-cooled single-cylinder diesel built to the same "192F" pattern, most often by the Chinese maker Koop. The engine is simple and cheap to fix, but it's louder and shakes more than a three-cylinder. Our Koop vs Kubota guide goes into the difference.

Under A$10,000 something is usually missing. The A$8,745 and A$8,789 machines we found had no hydraulic thumb, and at least one at A$9,989 had fixed tracks. Once a machine has a swing boom, expandable tracks, a hydraulic thumb and a quick hitch, the listings sit between A$10,989 and A$12,990.

Things that move the price within this group:

  • Controls. Cheaper machines use mechanical levers. Hydraulic pilot joysticks, which are lighter to use and closer to what you'd find on a hire machine, start appearing around A$12,000.
  • Attachment packs. A three-bucket pack added about A$1,000. A full kit with an auger drive and bits, a ripper, a rake and several buckets added about A$2,000.
  • Delivery. Some sellers deliver nationally, some within 300 km, and others are pick-up only with freight quoted on top.
New yellow 1-tonne mini excavator with its protective film still on the seat, on a factory floor
Most 1-tonne diggers sold in Australia, under many different brand names, come from factories in China. This one is on the factory floor in Jining, Shandong.

With a Kubota engine: about A$12,600 to A$22,000

The same chassis with a Kubota engine costs A$4,000 to A$5,000 more. You'll see two kinds: the Z482, a two-cylinder (Rippa's R10 at A$12,599 to A$13,499), and the three-cylinder D722 or D782. With expandable tracks, a thumb and a quick hitch, the most common price was A$15,990, and the middle of the group was A$16,999 to A$17,999. Packages with extra attachments and pilot controls ran up to A$21,989.

What the extra money buys: a water-cooled engine that runs smoother and quieter and copes better with long, hot days, and an engine most small-engine mechanics already know. Pay it if you'll use the machine often or plan to sell it once the job's done.

"Kubota" in a listing title doesn't prove there's a genuine Kubota in the machine. Before you pay, ask for a photo of the engine plate and serial number on the actual machine you're buying.

Bigger Chinese brands and Japanese brands

A step up are Chinese manufacturers that sell under their own name through Australian dealers: the Yuchai U10 at A$24,189, the Eurotrac HE12 at A$24,000 to A$26,400 and the SANY SY10U (Kubota D722, 1,195 kg) at A$29,689. You're paying for a dealer network with parts on the shelf and someone local to handle warranty.

Japanese and Korean brands don't publish prices for their 1-tonne machines in Australia. Kubota, Yanmar, Takeuchi, Bobcat and Develon all list them as price on application. For a rough idea, Kubota USA lists the K008-5 from US$28,450, and STM, a NSW equipment dealer, puts new 0.8 to 1.5-tonne machines at A$22,000 to A$42,000 in its buying guide. Ask a dealer for a written quote that includes delivery.

Used prices

Used 1-tonne Chinese machines rarely appear in dealer listings. Most change hands privately on Facebook Marketplace and Gumtree, which we haven't surveyed, so we can't give you a fair range for them yet. Used Japanese machines are easier to track. These were the Kubota U17-3 (1.7 tonnes) listings on Machines4u:

YearHoursStateAsking price (ex GST)
202625NSWA$32,950
2024about 480QLDA$38,000
2023785VICA$26,900
2023965VICA$26,500
20221,200NSWA$26,500
20201,980NSWA$20,950
20182,953WAA$18,000

Machines4u, Kubota U17-3 listings, seen 13 November 2026. Asking prices, ex GST. A private seller doesn't charge GST; a dealer adds 10%.

A used 1.7-tonne Chinese brand machine is cheaper: in October 2026 we saw an XCMG XE17U from 2021 with 600 hours at A$14,000 and a 2022 machine with 1,137 hours at A$19,000, both plus GST.

Before you buy any used digger, check:

  • that the hour meter matches the wear on the pins, bushes and bucket teeth;
  • the rubber tracks for cracks and missing lugs (a replacement set is a big cost);
  • for oil leaks around the cylinders, hoses and swivel;
  • a cold start: some white smoke for a moment is normal, constant blue smoke isn't;
  • for play in the boom and arm when you rock the bucket against the ground.

What else to budget for

ItemTypical costNotes
Three-bucket packabout A$1,000Narrow, standard and wide buckets, if not included
Full attachment kitabout A$2,000Auger drive and bits, ripper, rake, buckets
Hydraulic thumbA$490 + GSTOne Brisbane importer's price list
Hydraulic quick hitchA$790 + GSTSame price list; manual hitches are cheaper
Plant trailerA$4,000 – A$9,000About A$4,000 for a basic 8×5 tandem; A$7,000 to A$9,000 for a 2.4 to 2.5-tonne plant trailer
Deliveryfree to several hundred dollarsDepends on the seller and how far you are from a port or depot
First service kitabout A$280Oil and filters for the first service at around 30 hours
Fuelabout 1 to 1.5 litres an hourFactory figure for our PD12's Kubota D722; depends heavily on the work

Attachment and service prices: Australian dealer price lists and packages, October to November 2026. Trailer prices: dealer listings, November 2026.

A 1-tonne machine on a light plant trailer usually stays under 2,000 kg all up, which keeps the trailer brake rules simpler. A 1.7-tonne machine on a trailer usually doesn't. The towing section of our size guide has the numbers.

Questions that change the real price

Two quotes with the same headline price can be A$2,000 apart once you add everything up. Ask every seller:

AskWhy it matters
Does the price include GST?Some sellers list prices plus GST and some don't say either way. On a A$15,000 machine, GST is A$1,500.
Is delivery included, and to where?A pick-up price from a yard 800 km away isn't the same as a price delivered to your gate.
How many buckets, and are the thumb and quick hitch hydraulic?Each missing item costs A$250 to A$800 to add later.
Which engine, exactly?Ask for the make and model, then a photo of the engine plate. "Kubota" on its own isn't enough.
Do the tracks expand, and what are the controls?Expandable tracks get you through gates; pilot joysticks make long days easier.
Who handles a warranty claim, and where do parts come from?A long warranty is only worth as much as the speed you can get parts.
For an imported machine: is there an asbestos test report?Border Force can hold machinery without one. See our guide to the asbestos rules.

Buying straight from China

Alibaba listings for 1-tonne diggers often show prices of US$1,500 to US$3,200. Treat those as advertising: the quote you actually get for a fully kitted machine is higher, and it's the price at the factory gate or port. On top come sea freight, marine insurance, Australian port and clearance charges of about A$710 to A$840 plus GST, A$300 to A$1,000 more if the shipment is inspected, an asbestos test, 10% import GST and getting the machine from the port to your place.

One owner who imported their own 1.2-tonne Koop machine in early 2026 put the landed cost at about A$8,000. They collected it from the port and dealt with the factory, shipping and customs themselves, and any problem after delivery is theirs to sort out with the factory. Importing yourself can save money if you're comfortable with that. What a seller adds is someone in between: checking the machine before it ships, handling freight and customs, one price to your door, and a warranty and parts from one place. Our local dealer vs imported guide covers the trade-offs.

Where our two diggers sit

PD10 KoopPD12 Kubota
Price, incl GSTA$11,990A$16,490
EngineKoop single-cylinder dieselKubota D722 3-cylinder diesel
IncludedSwing boom, expandable tracks, hydraulic thumb, three bucketsSame, plus pilot joysticks and a manual quick hitch
DeliveryIncluded within 150 km of the port in Brisbane, Sydney or Melbourne; A$250 (incl GST) for each extra 100 km or part of it beyond that
Warranty12 months or 2,000 hours, whichever comes first
Lead timeBuilt to order, usually 8 to 10 weeks

The PD10 is priced at the middle of the single-cylinder listings with similar kit, and includes delivery. Most of those listings also include a quick hitch; ask us about one for the PD10 when you quote. The PD12 sits in the main band for Kubota-engined machines. Both are built to order, so you wait 8 to 10 weeks instead of driving home from a yard. Before you pay the balance you get a video of your own machine being checked. Warranty claims go through us by email and video call, with parts sent by international courier; our warranty page explains how a claim works.

Common questions

What's the average price of a mini excavator in Australia?

For a new 1-tonne machine, the middle of the market was about A$12,000 for a single-cylinder diesel and A$16,000 to A$18,000 for a Kubota engine, incl GST, in November 2026. Averages across all mini excavators aren't useful because they mix 1-tonne and 5-tonne machines.

What's the cheapest new mini excavator?

The cheapest new 1-tonne listings we found were A$8,745 and A$8,789 incl GST. Both left out things most buyers want, such as a hydraulic thumb. Expect to pay A$1,000 to A$2,000 more for a fully kitted machine.

Are Chinese mini excavators sold in Australia?

Yes, and in large numbers. In November 2026, 25 sellers were listing new 1 to 1.3-tonne machines on Machines4u, most of them Chinese-built, and Chinese brands such as SANY and Yuchai sell through their own Australian dealers.

How much does a 1-tonne excavator cost to run?

Fuel is the main running cost: about 1 to 1.5 litres an hour for a small Kubota diesel, by the factory figure. Add oil and filters at each service, plus tracks, pins and bucket teeth as they wear.

Is it cheaper to hire?

If you only need a digger for a few days a year, yes. Our hire or buy guide works out the break-even point with current hire rates.

Sources

Want a delivered price for your postcode?

Tell us where the machine is going and what you'll use it for, and we'll reply with a written price delivered to your door.

Ask for a price

Paddock Diggers is based in Zoucheng, part of Jining in Shandong, China, a city with dozens of mini excavator factories. We sell two 1-tonne machines to Australian buyers. Each machine is checked and filmed at the factory before it ships, then delivered to your door for one written price. You pay a 30% deposit, refunded in full until the factory starts building, and the balance only after you've seen the video of your own machine. Warranty claims and parts go through us, by email and video call, with parts sent by international courier.

We write these guides from regulators' and manufacturers' own pages, dealer listings and our own quotes, list our sources, and update a guide when prices or rules change.